Features | |
Pump body | cast iron |
Impeller | cast iron |
Mechanical seal | double seal with oil barrier: silicon carbide on pump side, ceramic-graphite on motor side |
Motor shaft | stainless steel AISI 304 |
Passage of solids | 50 mm 45 mm |
Depht of immersion | max 20 bar |
Liquid temperature | 0 – 40 °C |
Cable | H07 RNF, 10 m |
Bolts | A2 stainless steel |
Foot support | galvanized iron |
Gaskets | NBR rubber |
Motor | |
2 pole induction motor in oil bath | 3~ 230/400V-50Hz P≤4kW 3~ 400/690V-50Hz P>4kW 1~ 230V-50Hz required starter capacitor (35μF for 1,5HP model, 50μF for 2HP model) |
Insulation class | F |
Protection degree | IP68 |