Drainage pumps for loaded waters with single-channel centrifugal impeller, entirely made in cast iron.
These pumps, thanks to the type of impeller, generate a high head.
These pumps are designed for extremely heavy use and for pumping liquids with a high amount of suspended solids.
The sealing system consists of two mechanical seals lubricated in oil chamber.
The descent system for automatic coupling to the delivery piping is available.


Pump body cast iron
Impeller cast iron
Mechanical seal double seal with oil barrier: silicon carbide on pump
side, ceramic-graphite on motor side
Motor shaft stainless steel AISI 304
Passage of solids 50 mm
45 mm
Depht of immersion max 20 bar
Liquid temperature 0 – 40 °C
Cable H07 RNF, 10 m
Bolts A2 stainless steel
Foot support galvanized iron
Gaskets NBR rubber
2 pole induction motor
in oil bath
3~ 230/400V-50Hz P≤4kW
3~ 400/690V-50Hz P>4kW
1~ 230V-50Hz required starter capacitor (35μF for 1,5HP model, 50μF for 2HP model)
Insulation class F
Protection degree IP68


Quý khách xem file hướng dẫn lắp đặt, sử dụng tại đây


Download 50Hz catalog

Model Q max (m3/h) Hmax (m) Power P2 (HP) Download the PDF
DM160 54 15 1,50 Download
DM210 60 18 2,00 Download
DMT310 66 22 3,00 Download
DMT410 72 25 4,00 Download
DMT560 78 28 5,50 Download
DMT1000 144 31 10,00 Download


There are no reviews yet.

Be the first to review “DM”

Your email address will not be published. Required fields are marked *

logged_in_greeting="Xin chào. Để lại tin nhắn cho chúng tôi!" logged_out_greeting="Xin chào. Để lại tin nhắn cho chúng tôi!">